VapeWholesaleHubMods Sample Approval Meeting Agenda — a Factory Floor View
Retailers rarely lose money on mods because of price. They lose money because the first container was bought on a photograph. This page walks through what actually matters when you source mods at scale, written from the buying desk rather than the marketing department.
Inspection Before Dispatch
Train whoever receives mods cartons to note anything unusual at the point of unloading. Damage discovered at the dock is a freight claim; damage discovered a week later is your problem.
Inspection is only useful if the result is recorded somewhere you can find it later. A mods batch log with weights, codes and measurements turns a future complaint into a five minute lookup.
- Agree the tolerance band in writing before approving artwork.
- Ask how the factory measures puff count, then compare like with like.
- Plan the switch from air to sea freight before you need it.
- Check carton dimensions against your freight quote before confirming.
- Confirm the current customs classification with your own broker.
What Mods Really Costs Landed
Build mods price tiers around order sizes your customers actually place. Tiers that only make sense on a spreadsheet get ignored, and you end up discounting ad hoc instead.
Indicative reference points for planning purposes: entry tier from USD 1.12 per unit at 1000 units, mid tier at USD 1.69, and volume tier at USD 0.87 for full container quantities. These figures move with specification, packaging and freight, so treat them as a shape rather than a quote.
Turning Mods Into Repeats
Use your mods staff training time on the two questions customers actually ask. Anything more detailed gets forgotten by the second shift.
Use your mods staff training time on the two questions customers actually ask. Anything more detailed gets forgotten by the second shift.
What to Fix Before Approving Mods
Specification sheets are where a mods deal is won or quietly lost. Two samples can look and taste the same while using different coil wire, different wicking density and different tolerances on the mouthpiece. Those details decide how the unit behaves in week three rather than minute three.
| Product category | Disposable |
|---|---|
| Resistance band | 1.2 - 1.4 ohm |
| Capacity tolerance | +/- 5% |
| Puff count method | Machine cycle 2s on / 18s off |
| Master carton | 120 units |
| Carton weight | 10.1 kg |
| Shelf life | 18 months |
| Storage | 15-25 C, dry, away from direct light |
Freight, Customs and Timing
Track mods landed cost per unit as a running number, including duty and local delivery. It is the only figure that tells you whether a supplier change actually improved anything.
Split mods shipments across two sailings when the order is large enough. It costs slightly more but removes the risk of a single event wiping out a full quarter of stock.
Practical Checklist
- Model landed cost, not ex-works price, when comparing quotes.
- Plan the switch from air to sea freight before you need it.
- Write the complaint threshold into the order terms.
- Agree the tolerance band in writing before approving artwork.
- Ask how the factory measures puff count, then compare like with like.
- Keep sealed retained samples from every production batch.
Frequently Asked Questions
Is there a warranty on mods?
Manufacturing defects are covered against the retained sample standard. Normal wear, misuse and damage after opening are not. We publish the threshold in the order terms so both sides know exactly what the claim process looks like.
Do you provide compliance documents?
Every shipment leaves with the documentation set relevant to your market, including batch records and test reports where required. Your local rules still determine what you must file, so confirm those with your broker before import.
Can I mix strengths in one order?
In most cases yes, as long as each strength meets the minimum run length. Mixed strength cartons are popular with retailers building their first display because they show the full ladder without over committing.
What is the usual minimum order for mods?
For a standard production run the minimum is normally one master carton per flavour, though mixed cartons can be arranged for a first order. If you are testing the line, ask about a sample pack first and treat the freight as part of your research budget.
Next Step
If you take one thing from this page, take the retained sample habit. It costs a few units per batch and it is the difference between a disagreement and a decision.
Related Reading
- Mods Cross Selling With Adjacent Categories — Latin America
- Mods Cross Selling With Adjacent Categories — Warehouse Teams
- Mods Component Sourcing Behind the Finished Unit — Plain Language
- Mods Tamper Evidence and Seal Integrity — Container-Scale Orders
- Mods Customer Feedback Loops That Improve Reorders — North America
- Mods Print Methods for Cartons and Labels — the Buying Desk