VapeWholesaleHubMods Supplier Scorecard Template — Three Price Tiers
Everything below applies whether you are ordering one mixed carton or a full container. The numbers scale, but the logic does not change, which is the point of writing it down once.
Logistics That Protect Margin
Carton dimensions for mods are a design decision, not a packing afterthought. A few centimetres on the master carton can change how many units fit a pallet, and that repeats on every order.
How Mods Batches Are Checked
AQL sampling gets a lot of attention, but for mods the more useful habit is simply measuring the same three things on every single batch. Trend lines catch problems that pass/fail checks miss.
The defect rate that matters is the one your customer experiences, not the one the factory reports. Bridge that gap by inspecting the way a customer would open the box, not the way a line worker packs it.
- Agree the tolerance band in writing before approving artwork.
- Start with a mixed carton and let your own sell-through decide.
- Rotate stock by batch code rather than by delivery date.
- Ask how the factory measures puff count, then compare like with like.
- Write the complaint threshold into the order terms.
Modelling a Healthy Margin
Watch the mods price you pay over a year rather than per order. Factories respond well to visible volume, and a quarterly review is usually worth more than a hard negotiation each time.
Indicative reference points for planning purposes: entry tier from USD 1.39 per unit at 2000 units, mid tier at USD 0.95, and volume tier at USD 1.32 for full container quantities. These figures move with specification, packaging and freight, so treat them as a shape rather than a quote.
Trends Worth Watching
One visible change in mods is the move towards clearer labelling and traceability. Retailers who adopted batch coding early are finding it much easier to work with larger distributors now.
Flavour cycles in mods are shortening, which argues for smaller test orders and faster feedback loops rather than large speculative buys on a predicted winner.
Reading a Mods Spec Sheet
Specification sheets are where a mods deal is won or quietly lost. Two samples can look and taste the same while using different coil wire, different wicking density and different tolerances on the mouthpiece. Those details decide how the unit behaves in week three rather than minute three.
| Product category | Closed pod |
|---|---|
| Resistance band | 1.2 - 1.4 ohm |
| Capacity tolerance | +/- 3% |
| Puff count method | Machine cycle 2s on / 18s off |
| Master carton | 120 units |
| Carton weight | 11.7 kg |
| Shelf life | 18 months |
| Storage | 15-25 C, dry, away from direct light |
Practical Checklist
- Plan the switch from air to sea freight before you need it.
- Write the complaint threshold into the order terms.
- Rotate stock by batch code rather than by delivery date.
- Model landed cost, not ex-works price, when comparing quotes.
- Start with a mixed carton and let your own sell-through decide.
- Confirm the current customs classification with your own broker.
Frequently Asked Questions
What does a sample pack usually include?
A typical mods sample pack covers the strengths or variants you are most likely to list, packed so you can evaluate them side by side. Tell us which lines you are considering and we will match the pack to that rather than sending a generic selection.
Do you hold stock for regular customers?
For established programmes we can reserve production slots and, in some cases, hold finished mods stock against a forecast. It removes most of the lead time risk from a reorder and is worth discussing once volumes are stable.
Is there support for in-store material?
Yes. Shelf talkers, counter cards and simple planogram suggestions are available for mods ranges that reach a sensible volume. Most retailers find the plain strength and flavour cards do the most work.
What if a batch does not match the sample?
Keep the retained samples from the approval stage. If a delivered batch measurably differs, we compare against the retained set and resolve it against the production record. This is why we insist on sealed retained units from every run.
Can I visit the production facility?
Yes, and we encourage it for larger programmes. Visits are most useful when you already have a draft specification, because you can then check the specific processes behind the numbers you care about.
Next Step
We would rather quote you accurately and lose the order than quote optimistically and lose the relationship. Ask us the awkward questions early.
Related Reading
- Mods Order Consolidation Across Suppliers — Cash-and-Carry Formats
- Mods Warranty Claims Workflow — Online Sellers
- Mods Shelf Life, Batch Codes and Traceability — Cash-and-Carry Formats
- Mods Customer Education That Reduces Complaints — Low Minimum Quantities
- Mods Contract Clauses Worth Negotiating — Cross-Border Trade
- Mods vs Standard Alternatives: What Changes for Your Shelf — Retail Chains